Overjacketing and tubing extrusion are highly preferred processes for extruding a range of plastic materials. The overjacketing extrusion process is discussed here. In the process of wire coating, the bare wire or some bundles of jacketed …

Crosshead extrusion process is widely used to coat wires and cables with a polymer. The basic procedure includes pulling of the wire / cable to be coated at a uniform rate via a crosshead die, where it is covered with the molten plastic. T…

Vertical press machine for PTFE tube;Using for Pre-sintering PTFE material;Suit for new PTFE material or Recycle PTFE material;Rangeof diameter PTFE Extrusion 20-500 mm, Heating zones 5 zones; Automatic. Vertical press machiner is to extru…

Fluoropolymers have excellent, almost universal chemical resistance. They can be used both at high and very low temperatures (-260 to +260°C). They also possess outstanding resistance to weathering (UV-stability). Due to the low coefficien…

Single screw extrusion is one of the core operations in polymer processing and is also a key component in many other processing operations. The foremost goal of a single screw extrusion process is to build pressure in a polymer melt so tha…

Multi-hole ram extrusion is the process in which the raw material is pushed through a die having more than one hole. This process is highly productive for producing parts of smaller length and cross-section. For the given billet and final …

Fluoropolymers are produced from alkenes in which one or more hydrogen atoms have been replaced by fluorine. The most important members are polytetrafluoroethylene (PTFE), polychlorotrifluoroethylene (PCTFE), poly(vinyl fluoride) (PVF) and…

Injection moulding is a two step cyclical process: (a) melt generation by a rotating screw, and (b) filling of the mouldwith molten polymer by the forward ramming of the screw (called a reciprocating screw), followed by a very short packin…

Sunkoo PFG150 Single Screw Extruder Features:Vertical Ram Extruder for PTFE tube;Ram extruding machine for PTFE tube;Using for Pre-sintering PTFE material;Suit for new PTFE material or Recycle PTFE material;Rangeof diameter PTFE Extrusion …

Gaskets Press Machine Features:Efficiently producing: 300pieces/h(large size);More energy saving: the total power only 5KW;More friendly to environment: no PTFE powder splashing but powder output automatically;More precise: producing gaske…

Thread seal tape (also known as PTFE tape or plumber’s tape) is a polytetrafluoroethylene (PTFE) film for use in sealing pipe threads. The tape is sold cut to specific widths and wound on a spool, making it easy to wind around pipe threads…

Etching is a chemical process that removes the fluorine atoms from the surface layer of the fluoropolymer. This surface layer is so thin; it is most conveniently measured in Angstroms. Once the fluorine atoms are removed, the carbon atoms …

Sunkoo’s enormous strength comes from a wonderful combination of its highly efficient and professional management and a dedicated workforce of qualified and experienced engineers and technicians and marketing personnel, which in turn, lead…

Extrusion is a process used to create objects of a fixed cross-sectional profile. A material is pushed through a die of the desired cross-section. The two main advantages of this process over other manufacturing processes are its ability t…

PTFE tubing extrusion machine is to extrude PTFE/UHMWPE Tubes. It is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other m…